D-D The Aquarium Solution KHManager Quick Start Manual page 5

EN
Local Bluetooth Connection
• Ensure that all app permissions for the Kamoer Remote app on your mobile device are set
to ON.
• Open the Kamoer Remote app and login to your account, tap the
corner and select 'Offline Control' from the list.
• From the drop down menu at the top, switch to 'Bluetooth Mode'
• The app will scan for available Bluetooth devices, once found they will display on the
screen. Tap on the icon and serial number relating to your KH Manager. This will then
take you to the settings pages for the unit.
INSTALLING THE KH MANAGER
Test Reagent
• THE KH MANAGER MUST BE INSTALLED ON A FLAT, LEVEL AND STABLE SURFACE.
• Attach the tubing using the twist lock connectors as shown in the diagram above,
matching the coloured hose to the correct coloured port. It is important that any hose
connections are properly locked, to avoid air being drawn in. Ensure that the supplied
filter is fitted to the end of the green pipe which takes sample water from the sump and
is positioned so that the end will always remain submerged but will not draw in debris
which may clog the hose and cause false test results.
• Go back to your mobile device and open the Kamoer Remote app. Select your
KH Manager from the 'My Devices' screen.
ww w.t hea q ua r i ums olut io n.c om
COM
DC24V
KH Solution OUT
KH Solution
Tank water IN
Aquarium Waste water
icon in the top left
Waste container
or return to tank