Table of Contents
Advertisement
2.5.5
Network management checkout
The management computer can manage the device in the following two ways.
Local command line interface management:
◼
Use a DB9 or Type-C serial cable to connect the management computer to the Console
management port of the OLT device, and then access the command line management interface of
the OLT device through the serial port. For related parameters, refer to
Web management
◼
Use an Ethernet cable to connect the management computer to the NMS outband management
port of the OLT device, and then access the web UI of the OLT device on a browser. For related
parameters, refer to
OLT default
configuration.
12
Document version: V1.0
OLT default
configuration.
Advertisement
Table of Contents
