About Cisco Catalyst Iw9167E Heavy Duty Access Point; Introduction To Cisco Catalyst Iw9167E Heavy Duty Access Point; Cisco Catalyst Iw9167E Heavy Duty Access Point Features - Cisco Catalyst IW9167E Hardware Installation Manual

About Cisco Catalyst IW9167E Heavy Duty Access
Point
•
•
•
•
•
•

Introduction to Cisco Catalyst IW9167E Heavy Duty Access Point

The Cisco Catalyst IW9167E Heavy Duty Access Point is a tri-band 802.11ax (Wi-Fi 6) AP that provides
reliable wireless connectivity for mission-critical applications as organizations automate processes and
operations. It can operate as Wi-Fi 6 or Cisco Ultra-Reliable Wireless Backhaul (Cisco URWB). Wi-Fi 6
technology brings higher density, higher throughput, more channels, power efficiency, and improved security
in industrial or outdoor locations. Cisco URWB provides ultra-reliable wireless connectivity for moving assets
or to extend the network where running fiber isn't feasible or is too costly.
The Cisco Catalyst IW9167E Heavy Duty Access Point comes with three 4x4 radios, in a heavy-duty design
that is IP67 rated, and packed with advanced features.
A full listing of the AP's features and specifications is provided in the
Access Point Data

Cisco Catalyst IW9167E Heavy Duty Access Point Features

Cisco Catalyst IW9167E Heavy Duty Access Point is supported on Cisco Catalyst 9800 wireless
controller-based products, and have the following features:
• 2 GB DDR4 memory, 1 GB NAND Flash
• Tri-radio, dual band support: 2.4 GHz Slot 0, 5 GHz Slot 1, and 5 GHz Slot 2
• 4 x 4 MIMO with up to 4 spatial streams
Introduction to Cisco Catalyst IW9167E Heavy Duty Access Point, on page 1
Cisco Catalyst IW9167E Heavy Duty Access Point Features, on page 1
Connectors and Ports, on page 2
Power Sources, on page 6
SFP Option, on page 7
Antennas and Radios, on page 8
Sheet.
Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide
1
C H A P T E R
Cisco Catalyst IW9167E Heavy Duty
1