Cisco Catalyst IW9167E Hardware Installation Manual page 11

About Cisco Catalyst IW9167E Heavy Duty Access Point
Figure 1: IW9167EH Connectors and Ports
1
3
5
7
Console port (RJ-45)
Status LED
100M/1000M/2.5G/5G Multigigabit Ethernet
(RJ-45) / M12 X-code auto-sensing PoE+ in
(802.3at/bt), UPOE-in
Note M12 X-code port by using
M12-RJ45 adapter can support
up to 2.5G rate.
Antenna ports
Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide
2 Reset button
For information on how to use the Reset
button, see Using the Reset Button, on page
53.
4 SFP (copper) 100M/1000M/10G
Multigigabit Ethernet /M12 X-code or SFP
(fiber) 1G/10G
Note M12 X-code port by using
M12-RJ45 adapter can support
up to 2.5G rate.
6 DC power input (micro-fit, or M12 4-pin
A-code by using M12 adapter)
8 GNSS port
Connectors and Ports
3