Cisco Catalyst IW9167E Hardware Installation Manual page 37

Installation Overview
Figure 11: Mounting Bracket and Pole Clamp Bracket Assembly
1 Pole clamp bracket assembly
2 Access point support bolt
Step 12
Hand-tighten the bolts and the nut (do not overtighten).
Step 13 Adjust the top edge of the mounting bracket until it is horizontal and tighten the bolts and the flange nut to 13 to 15
ft-lbs (17.6 to 20.3 N-m).
Step 14
Use the included bolts, washers, and nuts to attach the access point to the mounting plate.
Step 15 Torque the nuts to 6 to 7 ft-lbs.
3
4
Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide
Using the Mounting Bracket AIR-ACCPMK3700-2=
Bolt holes
Mounting bracket
29