Cisco Catalyst IW9167E Hardware Installation Manual page 43

Installation Overview
Figure 15: Access Point Grounding Kit Contents
1
Note
To ground the access point:
Step 1 Use a crimping tool to crimp a 6-AWG ground wire (not included in the grounding kit) to the ground lug.
Step 2 Connect the supplied ground lug to the access point ground connection point using the supplied screws. Apply supplied
oxide inhibitor between the ground lug and the access point ground connection.
Grounding lug
The grounding kit also includes the oxide inhibitor, which is contained in a tube.
Cisco Catalyst IW9167E Heavy Duty Access Point Hardware Installation Guide
Grounding the Access Point
2 Screws x 2, M4 x 6mm
35