Calibration
ITEM
Auto Density
Adjust
Density
Adjust
Registration
Print Tuning
Pattern
SETTI
NGS
On/Off
Execute
Execute
Execute
50
– C710n User's Guide
EXPLANATION
Enables/disables automatic
density adjustment.
If Execute is selected, the
printer will immediately adjust
density and reflect it in TRC
compensation.
This adjustment must be
executed when the printer is
idling. It can become invalid
if executed in any other
state.
When this menu is selected, the
printer performs AutoAdjust
Registration.
This adjustment must be
executed when the printer is
idling.
Prints the pattern for the user
to adjust TRC. Ordinarily, this
function is not needed because
TRC is automatically adjusted to
the recommended levels
through density adjustment and
TRC compensation.
Adjustment results will be
reflected as offset values
(addition) to the corrections
through the Adjust Density/TRC
Compensation function.