Oki C710dtn User Manual page 56

ITEM SETTINGS
Enable HDD Yes
No
Erase HDD Execute
Enable No
initializatio
Yes
n
EXPLANATION
Even if a machine is inoperable at
installation because of a faulty HDD, the
machine can be made operable by setting
this parameter to No (ignores the existence
of the HDD).
When No is set, access to a HDD results in
FAIL because the HDD is regarded as not
attached.
After setting change and exit from the
menu, the printer will restart.
Deletion of all data stored in the hard disk.
DoD 5220.22-M sanitizing formula is used
for clearing the desk. The machine will
restart after changing setup. The following
message appears after pressing the Enter
switch.
Are You Sure? Yes / No
NO = return to the source menu
Yes = the procedure for clearing disk stars
immediately after the machine reboots.
If the Cancel button is held down during
erasing, the following confirmation
messages will appear to discontinue
processing.
Do You Wish to Cancel? Yes / No
NO= procedure will continue.
YES = procedure will discontinue.
Prevents a setting change accompanying
initialization of Block Device (HDD,FLASH).
56
– C710n User's Guide