Oki C710dtn User Manual page 40

ITEM
PCL Font Pitch
Setup
(cont.)
Symbol
Set
A4 Print
Width
SETTINGS
99.9 CPI
~
10.00 CPI
~
0.44 CPI
PC-8
78 column
80 column
40
– C710n User's Guide
EXPLANATION
Width of the PCL default font in
characters per inch (CPI).
Default font is fixed-pitch,
scalable font.
The value of pitch is displayed
down to the second decimal
place.
Displayed only when the font
selected in Font No. is a fixed-
spacing, scalable font.
Sets the symbol set of PCL (see
machine operator panel for
complete list).
Sets the number of characters
for A4 paper.
Auto LF.
This is for 10-CPI characters
when Auto CR/LF Mode is set to
OFF.
This menu is enabled only when
A4 paper is selected in the
menu that sets the print width
of A4 paper in portrait
orientation.
Usually, such A4 paper print
width is set slightly narrower
than 8 inches (about 7.93
inches).
This setting cannot print 80 10-
cpi characters (only prints up to
78 10-cpi characters). 80
characters set at A4 Print Width
widen the right and left
margins.
A PCL command selects or
selects/deselects Auto CR/LF
mode.