Oki C710dtn User Manual page 90

sheet through the drum cavity area. Then allow the
pressure release lever to rise again.
Note:
If the sheet is well advanced into the fuser (only a short
length is still visible), do not attempt to pull it back.
Follow the next steps.
(d) To remove a sheet in the fuser; push the two retaining
levers (a) towards the rear of the printer to release the
fuser. Withdraw the fuser unit using the handle (b).
a
Press release lever (c) and pull the trapped paper from the
fuser.
90
– C710n User's Guide
a
b
c