Boot Menu; Parallel Setup - Oki C610dtn User Manual

ITEM
Cyan/Magenta/
Yellow/Black
Tuning
Cyan/Magenta/
Yellow/Black
Darkness

Boot Menu

This menu should only be changed by the System Administrators. In order to
gain access to this menu, follow the instructions in
Settings: Administrator" on page
This menu is in English only (default settings in bold type).

Parallel Setup

Note:
This menu item only applies to the C711.
This menu controls the operation of the printer's Parallel data
interface.
ITEM
Enter
Password
Parallel
Highlight –3,–2,–1,
0,+1,+2,+
3,
Mid-Tone –3,–2,–1,
0,+1,+2,+
3,
Dark –3,–2,–1,
0,+1,+2,+
3,
–3,–2,–1,
0,+1,+2,+
3,
SETTINGS
xxxxxxxxxxxx
Enable /
Disable
57
– C610/C711 User's Guide
SETTINGS
Adjusts HIGHLIGHT (light area)
of the TRC.
+ = Darker
– = Lighter
Adjusts MID-TONE area of the
TRC.
+ = Darker
– = Lighter
Adjusts DARK area of the TRC.
+ = Darker
– = Lighter
Adjusts the engine density.
27.
Enter a password to access the Boot menu.
Password should be from 6 to 12 digits of
alpha/numeric characters (or mix)
The default value is "aaaaaa"
Enables or disables the parallel port.
EXPLANATION
"How to Change the
EXPLANATION