Replacing The Transfer Belt Unit - Oki C610dtn User Manual

Replacing the Transfer Belt Unit ____

The belt unit is located under the four image drums.
Switch off the printer and allow the fuser to cool for about
10 minutes before opening the cover.
1. Press the cover release and open the printer's top cover
fully.
If the printer has been powered on, the fuser will be
hot. This area is clearly labelled. Do not touch.
2.
Note the positions of the fo
drums (b). It is e
b
WARNING!
ur toner cartridges (a) and image
ssential that they go back in the same order.
96
– C610/C711 User's Guide
a