Oki C610dtn User Manual page 42

ITEM
Print Edit Size
Setup
(cont.)
Trapping
X
Dimension
Y
Dimension
PS Setup Network
Protocol
Parallel
Protocol*
SETTINGS
Cassette Size/
A4/A5/A6/B5/
Legal14/
Legal13.5/
Legal13/Letter/
Executive/
Custom/Com-9
Envelope/Com-
10 Envelope/
Monarch
Envelope/DL
Envelope/C5/
Index Card
Off
Narrow
Wide
64 mm
~
210 mm
~
216 mm
127 mm
~
297 mm
~
1321 mm
ASCII/RAW
ASCII/RAW
42
– C610/C711 User's Guide
EXPLANATION
Sets the size of an area to draw
when the host PC does not
specify the size via the paper
edit size designating command
(Not valid for PS — only for PCL).
Sets trapping.
Specifies paper width of Custom
paper as a default value.
Sets a paper size at right angles
to the paper run direction.
Specifies paper length of Custom
paper as a default value.
Sets a paper size in the same
direction as the paper run
direction.
Specifies PS communication
protocol mode of data from NIC
port.
(In RAW mode, Ctrl-T is invalid).
PS models only.
Specifies PS communication
protocol mode of data from
Centronics port.
(In RAW mode, Ctrl-T is invalid).
PS models only.
* This menu item is applicable to the
C711 only.