Power Save Mode - Oki C6150 Reference Manual

Power Save Mode

Power Save sets how long the
printer waits before going into
standby mode. This saves energy,
but the printer requires time to
warm up when it receives a print
job or if you want to enter the
menu and change settings.
Setting the Power Save
Interval
1. Press + repeatedly until you see
SYSTEM CONFIG MENU on the
display.
2. Press E .
NTER
POW SAVE TIME
60 MIN
3. Press E .
NTER
The second line of the display
starts blinking.
4. Press + repeatedly until the
value you wish to select (5, 15,
30, 60 [default], or 240
minutes) appears on the
display.
5. Press E
NTER
The new setting is engaged and
the second line of the display
stops blinking.
6. Press O L
N INE
twice.
.
Disabling (or
Re-enabling) Power
Save
The printer comes set for Power
Save enabled. To disable (or
enable) Power Save
1. Press E
mode.
2. Press - repeatedly until you see
MAINTENANCE MENU on the
display.
3. Press E
4. Press + repeatedly until you see
POWER SAVE
ENABLE†
*
5. Press E
The second line of the display
starts blinking.
6. Press + to toggle back and forth
between DISABLE and ENBABLE.
7. Press E
The new setting is engaged and
the second line of the display
stops blinking.
8. Press O
19
to enter the Menu
NTER
.
NTER
.
NTER
twice.
NTER
L .
N INE