Dometic NDS IM12-150 Installation And Operating Manual page 18

EN
4. Replace the cover.

Connecting the battery monitor
Note
• The wireless display can be connected to the control unit via the connection for additional 12 V de-
vices instead of connecting it to a starting battery.
• If the wireless display is connected to the control unit via the connection for additional 12 V devices,
the battery monitor is switched off when the battery disconnection is active.
• Stick one temperature sensor on each of the house batteries. Observe
• The specified value for the fuse of the house battery is a reference value. Use a fuse that is at least
30 % higher than the maximum current of the house battery used.
18
1.
2.
fig.  on page 10.