Hach SL1000 User Manual page 343

Опция Описание
Маршруты Выдает упорядоченный список кодов мест. Если выбран какой-либо маршрут, коды
мест автоматически появляются на экране измерений и записываются. Нажмите
клавишу RIGHT (вправо), чтобы выбрать следующее место. Для настройки маршрутов
воспользуйтесь Интернет-приложением "tool.htm". Подробную информацию см. на веб-
сайте производителя.
Примечания Запишите специальную информацию и добавьте ее в журнал событий.
7.3 Complete Chemkey measurements
Do not start a new Chemkey measurement when other Chemkey measurements are not yet completed. Only put
the meter in the sample once for a Chemkey measurement.
To complete a measurement with the Chemkey(s), do the procedure that follows. Refer to
Multiple probe measurements can be completed at the same time. Refer to
датчиком на стр. 345.
1. Set the meter power to on.
2. If complete traceability is necessary, enter a site ID and operator ID before measurement. Refer
to Use an operator ID
3. Push the applicable Chemkey(s) fully, in one movement, into the slot(s) 1 to 4. Make sure to
always use a new Chemkey for each measurement. It is important to push the Chemkey all of the
way into the slot.
When a Chemkey is in a slot, do not move or touch the Chemkey.
4. Rinse the sample cup with the sample.
5. Fill the meter sample cup to the fill-line with the sample.
6. Put the meter into the meter sample cup.
7. Wait for the sound alert and/or the meter removal animation (within 1 to 2 seconds), then
immediately remove the meter from the sample cup.
Put the meter back into the case and wait until the measurement is completed. The parameters
have different reaction times. The display shows a progress bar with the time that remains until
the measurement is completed.
8. The measurement values are shown on the display.
Примечание: When an error shows, push Details for more information.
2
A monochloramine Chemkey and a free ammonia Chemkey are both necessary to obtain a free
ammonia measurement.
У В Е Д О М Л Е Н И Е
на стр. 342 and Используйте код места
Выполнение измерения
на стр. 342.
2
Русский 343
Рисунок 7.