Advertisement
Quick Links
Quick Installation Guide
NO. G03-JC903QIG01-F
MB Model: JLI1BV-0L Series
Rev: 1.0
Release Date: 2022-11-03
Notice:
The photos in this file are for illustration purpose only. The model may not be the latest version. Please
refer to the product you purchased for actual specification.
Advertisement
Related Manuals for JETWAY JLI1BV-0L Series
Summary of Contents for JETWAY JLI1BV-0L Series
- Page 1 Quick Installation Guide NO. G03-JC903QIG01-F MB Model: JLI1BV-0L Series Rev: 1.0 Release Date: 2022-11-03 Notice: The photos in this file are for illustration purpose only. The model may not be the latest version. Please refer to the product you purchased for actual specification.
- Page 2 I. To Dissemble the Chassis 1. Put the system upon a stable platform with this side up, as the photo shows. 2. Locate the screws at the spots marked on the cover and unscrew them one by one. 3. Lift the cover up to open the chassis.
- Page 3 4. The internal structural view of the system for further intallation. II. To Install SO-DIMM to the Board 1. Locate the SO-DIMM slot on the board. 2. Insert the gold-finger side of the compatible 3. Press down to secure the SO-DIMM to the slot. SO-DIMM into the slot at a 30 degree.
- Page 4 III. To Install M.2 E-Key (2230) PCIe Wi-Fi Card Sort out the USB cable to make room and Remove the marked screw and screw bolt, and locate the M.2 E-Key (2230) slot on the board. use screw bolt to lock compatible card to the slot Prepare compatible M.2 E-Key (2230) card.
- Page 5 7-1. The washer①&the hexagonal screw nut②. Push this antenna screw head into antenna 7-2. Push the washer① through the antenna hole of the panel from the backside of the panel. head. And then lock the antenna screw head to the Press the metal hat on the end of the antenna front side of the panel with the hexagonal screw string to corresponding antenna slot on the card...
- Page 6 IV. To Install M.2 M-Key (2242/2280) PCIe/SATA Card 2280 2242 Sort out the USB cable to make room and To install compatible type-2242 card, please locate the M.2 SATA slot on the board. System remove the screw in the marked spot at first. supports two types of M.2 M-Key card in different lengths (2242/2280).
- Page 7 V. To Install M.2 B-Key (3042/3052) Card 3052 3042 Locate the M.2 B-Key PCIe (3042/3052) slot on Remove the marked screw and use it to lock the board. Prepare compatible M.2 B-Key compatible card to the slot in later installation. (3042/3052) card.
- Page 8 VI. To Install 2.5” Hard Disk to HDD Tray 1. Locate the HDD racks on the chassis. 2. Push the 2.5’’ HDD into the room between the racks until the screw holes of the racks matched those in the HDD and make sure the direction is as same as picture showed.
- Page 9 Notice: Make sure that: 1.the racks are installed to its original place; 2. HDD SATA & power connectors face towards the direction of the chassis with enough room to facilitate cable connection. Notice: When all necessary installations are finished, please make sure that all cables unplugged before installations are connected to their original locations before restoring the cover to the chassis and screws locked to its original locations (Refer to Part I).