HIKVISION DS-K3B501SX Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Automatic Barriers
  5. DS-K3B501SX Series
  6. Quick start manual
HIKVISION DS-K3B501SX Quick Start Manual

HIKVISION DS-K3B501SX Quick Start Manual

Swing barrier
Hide thumbs Also See for DS-K3B501SX:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K3B501SX Swing Barrier
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K3B501SX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-K3B501SX

Summary of Contents for HIKVISION DS-K3B501SX

  • Page 1 DS-K3B501SX Swing Barrier Quick Start Guide...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K3B501SX Swing Barrier Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 DS-K3B501SX Swing Barrier Quick Start Guide under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 6 DS-K3B501SX Swing Barrier Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 7 DS-K3B501SX Swing Barrier Quick Start Guide Do not ingest battery, Chemical Burn Hazard. ● This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  • Page 8 DS-K3B501SX Swing Barrier Quick Start Guide Please keep all wrappers after unpack them for future use. In case of any failure occurred, you ● need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.
  • Page 9 DS-K3B501SX Swing Barrier Quick Start Guide Available Models Product Name Model Description Swing Barrier DS-K3B501SX-L Left Pedestal DS-K3B501SX-M Middle Pedestal DS-K3B501SX-R Right Pedestal Scan the QR code to get User Manual of Swing Barrier. Note that mobile data charges may apply if Wi-Fi is unavailable.

  • Page 10: Table Of Contents

    DS-K3B501SX Swing Barrier Quick Start Guide Contents Chapter 1 Overview ........................1 1.1 Introduction ........................... 1 1.2 Main Features ........................1 Chapter 2 Video Guide ....................... 3 Chapter 3 System Wiring ......................4 Chapter 4 Installation ....................... 10 4.1 Disassemble Pedestals ......................10 4.2 Install Supercapacitor (Optional) ..................
  • Page 11 DS-K3B501SX Swing Barrier Quick Start Guide 6.1 Set Study Mode ........................36 6.2 Pair Keyfob (Optional) ......................37 6.3 Initialize Device ........................38 6.4 Switch to RS-485/RS-232 Mode ................... 39 6.5 Switch Relay Output Mode (NO/NC) ..................39 6.5.1 Barrier Control Relay Output Mode ................39 6.5.2 Alarm Relay Output Mode (NO/NC) ................

  • Page 12: Chapter 1 Overview

    DS-K3B501SX Swing Barrier Quick Start Guide Chapter 1 Overview 1.1 Introduction The swing barrier with two barriers and 12 IR lights is designed to detect unauthorized entrance or exit. By adopting the swing barrier integratedly with the access control system, person should authenticate to pass through the lane via swiping IC or ID card, scanning QR code, etc.
  • Page 13 DS-K3B501SX Swing Barrier Quick Start Guide Remote control and management ● Online/offline operation ● LED indicates the entrance/exit and passing status ● Barrier remains open when powered down ● Fire alarm passing ● When the fire alarm is triggered, the barrier will be open automatically for emergency...

  • Page 14: Chapter 2 Video Guide

    DS-K3B501SX Swing Barrier Quick Start Guide Chapter 2 Video Guide Scan the QR code to view the installation videos for details.

  • Page 15: Chapter 3 System Wiring

    DS-K3B501SX Swing Barrier Quick Start Guide Chapter 3 System Wiring The preparation before installation and general wiring. Steps 1. Draw a central line on the installation surface of the left or right pedestal. 2. Draw other parallel lines for installing the other pedestals.
  • Page 16 DS-K3B501SX Swing Barrier Quick Start Guide Figure 3-1 Hole Position Diagram 4. Bury cables. Each lane buries 1 network cable and 1 high voltage cable. For details, see the system wiring diagram below.
  • Page 17 DS-K3B501SX Swing Barrier Quick Start Guide Figure 3-2 System Wiring Diagram (General Wiring)
  • Page 18 DS-K3B501SX Swing Barrier Quick Start Guide Note The supplied interconnecting cable length is 5.5 m. ● The suggested inner diameter of the low voltage conduit is larger than 30 mm. ● If you want to bury both of the AC power cord and the low voltage cable at the entrance, the ●...
  • Page 19 DS-K3B501SX Swing Barrier Quick Start Guide Figure 3-3 Wire Face Recognition Terminal Note The left pedestal and the middle pedestal should bury interconnecting cables for connecting ● the face recognition terminal. The face recognition terminal installed on the left pedestal will gain power from the sub ●...
  • Page 20 DS-K3B501SX Swing Barrier Quick Start Guide If you want to bury both of the AC power cord and the low voltage cable at the entrance, the ● two cables should be in separated conduits to avoid interference. If more peripherals are required to connect, you should increase the conduit diameter or bury ●...

  • Page 21: Chapter 4 Installation

    DS-K3B501SX Swing Barrier Quick Start Guide Chapter 4 Installation 4.1 Disassemble Pedestals Before installation, you should use the key to open the pedestals. View the pictures below to find the lock holes. Figure 4-1 Lock Holes 4.2 Install Supercapacitor (Optional) The supercapacitor supplies power for main lane control board and sub lane control board when the device is powered off.
  • Page 22 DS-K3B501SX Swing Barrier Quick Start Guide Refers to Components Introduction to view the supercapacitor's position. ● The working temperature of the supercapacitor is -40 °C to 70 °C (-40 °F to 158°F). ● 1. Remove the screws on the supercapacitor component to disassemble the supercapacitor component.

  • Page 23: Install Pedestals

    DS-K3B501SX Swing Barrier Quick Start Guide 4.3 Install Pedestals Before You Start Prepare for the installation tools, check the device and the accessories, and clear the installation base. Steps Note The device should be installed on the concrete surface or other non-flammable surfaces.
  • Page 24 DS-K3B501SX Swing Barrier Quick Start Guide Figure 4-4 Dimension 1. Prepare for the installation tools, check the components, and prepare for the installation base. 2. Drill holes on the ground according to the installation holes on the pedestals and insert the expansion sleeves.
  • Page 25 DS-K3B501SX Swing Barrier Quick Start Guide Note Do not immerse the pedestal in the water. In special circumstances, the immersed height ● should be no more than 150 mm. The installation footprint is as follows: ● Figure 4-5 Installation Footprint...

  • Page 26: Chapter 5 General Wiring

    DS-K3B501SX Swing Barrier Quick Start Guide Chapter 5 General Wiring 5.1 Components Introduction By default, basic components of the turnstile are connected well. The pedestals can communicate by wiring the interconnecting cables. And the turnstile supports wiring the AC electric supply for the whole system's power supply.

  • Page 27: Wiring Electric Supply

    DS-K3B501SX Swing Barrier Quick Start Guide Figure 5-2 Components 2 Note If the turnstile contains two lanes, standing at the entrance position, the IR modules on the left pedestal are the IR sending modules. The IR modules on the right pedestal are the IR receiving modules.

  • Page 28: Wire Interconnecting Cable

    DS-K3B501SX Swing Barrier Quick Start Guide Note The cable bare part should be no more than 8 mm. It is suggested that you can immerse the ● bare part into the liquid tin. If possible, wear an insulation cap at the end of the bare cable.
  • Page 29 DS-K3B501SX Swing Barrier Quick Start Guide Figure 5-3 Cable Hole of Interconnecting Cable Follow the instructions below to connect the interconnecting cable. Figure 5-4 Connect Interconnecting Cable...

  • Page 30: Wire Network Switch

    DS-K3B501SX Swing Barrier Quick Start Guide 5.4 Wire Network Switch Connect the network cable and the network switch. Steps Note The device do not support the PoE network switch. Connecting with the PoE network switch may damage the control board.
  • Page 31 DS-K3B501SX Swing Barrier Quick Start Guide Figure 5-6 Open Top Cover The network switch's position is shown as follows.

  • Page 32: Terminal Description

    DS-K3B501SX Swing Barrier Quick Start Guide Figure 5-7 Network Switch Position 3. Lead out 12 V power supply from the main switch and connect it to the network switch's power interface. 4. Connect the network cable with the network switch.

  • Page 33: Sub Control Board Terminal Description

    DS-K3B501SX Swing Barrier Quick Start Guide 5.5.2 Sub Control Board Terminal Description The sub lane control board contains interconnecting interfaces, BUS, motor encoder interface, debugging port, door closed position interface, seven-segment display, strip light interface (reserved), supercapacitor, power interface, and motor drive interface.
  • Page 34 DS-K3B501SX Swing Barrier Quick Start Guide...

  • Page 35: Access Control Board Terminal Description

    DS-K3B501SX Swing Barrier Quick Start Guide 5.5.3 Access Control Board Terminal Description Table 5-1 Access Control Board Terminal Description Access Controlling Board Terminal Description Power Output 1 +12 V Power Output Grounding Wiegand Card Indicator of Card Reader Control Output (Invalid Card...
  • Page 36 DS-K3B501SX Swing Barrier Quick Start Guide Access Controlling Board Terminal Description Indicator of Card Reader Control Output (Valid Card Output) Card Reader Buzzer Control Output Wiegand Head Read Data Input Data1 Wiegand Head Read Data Input Data0 Grounding RS-485 Interface...
  • Page 37 DS-K3B501SX Swing Barrier Quick Start Guide Access Controlling Board Terminal Description Exit Button Door 2 Signal Input Grounding Door 1 Signal Input Door Lock (Relay) Door 1 Relay Output (Dry Contact) Door 2 Relay Output (Dry Contact) Alarm Output NO/NC1...

  • Page 38: Access Control Board Serial Port Id Description

    DS-K3B501SX Swing Barrier Quick Start Guide people counting and people number, see Configuring People Counting Parameters in User Manual of iVMS-4200 AC Client Software. For detailed information about the DIP switch, see DIP Switch Description. ● 5.5.4 Access Control Board Serial Port ID Description You can use the jumper cap on the access control board to switch the interface communication mode.
  • Page 39 Use the jumper cap to switch the serial port communication mode with the lane controller. By default, the interface is wired and it is in RS-485 communication mode. If wiring other controllers (compatible with Hikvision communication protocol), use the jumper cap to switch between RS-485 and RS-232 communication mode.
  • Page 40 DS-K3B501SX Swing Barrier Quick Start Guide Figure 5-9 Interface and Corresponded UART No.

  • Page 41: Rs-485 Wiring

    DS-K3B501SX Swing Barrier Quick Start Guide 5.5.5 RS-485 Wiring Note There are four RS-485 interfaces, which are for connecting ID card reader, IC card reader, QR ● code scanner, fingerprint and card reader, card recycler, text screen, fingerprint reader, and face recognition terminal.

  • Page 42: Rs-232 Wiring

    DS-K3B501SX Swing Barrier Quick Start Guide 5.5.6 RS-232 Wiring Note There are three RS-232 interfaces (UART4, UART7, and UART8). UART7 and UART8 can connect ● QR code scanner, card recycler, and text screen, while UART4 can connect QR code scanner, card recycler, text screen, and face recognition terminal.

  • Page 43: Wiegand Wiring

    DS-K3B501SX Swing Barrier Quick Start Guide 5.5.7 Wiegand Wiring Note Connect the OK/ERR/BZ if the access controller should control the LED and buzzer of the Wiegand card reader. 5.5.8 Barrier Control Wiring By default, the barrier has connected with the access control board. The lane control board can...
  • Page 44 DS-K3B501SX Swing Barrier Quick Start Guide to control the third party barriers. Interface D1 controls barrier opening for entrance, while interface D2 controls barrier opening for exit. Note Use the jumper cap to switch the relay status. For details, see Barrier Control Relay Output Mode .

  • Page 45: Alarm Output Wiring

    DS-K3B501SX Swing Barrier Quick Start Guide 5.5.9 Alarm Output Wiring Note For details about changing the relay output status via the jumper cap, see Alarm Relay Output Mode (NO/NC) . 5.5.10 Exit Button Wiring You can view the exit button wiring diagram.
  • Page 46 DS-K3B501SX Swing Barrier Quick Start Guide Figure 5-10 Exit Button Wiring...

  • Page 47: Chapter 6 Device Settings

    DS-K3B501SX Swing Barrier Quick Start Guide Chapter 6 Device Settings After installation and wiring completed, you should set the barriers closed position (study mode) before entering the working mode. You can also set the test mode, normal mode, passing mode and memory mode, pair the keyfob,...

  • Page 48: Pair Keyfob (Optional)

    DS-K3B501SX Swing Barrier Quick Start Guide 4. Power off the device. 5. Set the No.1 switches of the 8-digit DIP Switch on the main control board by referring to the following figure. 6. Power on the device again. Note For details about the DIP switch value and meaning, see DIP Switch Description.

  • Page 49: Initialize Device

    DS-K3B501SX Swing Barrier Quick Start Guide Note Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the ● keyfob will select only one of them to pair. For details about DIP switch value and meaning, see DIP Switch .

  • Page 50: Switch To Rs-485/Rs-232 Mode

    DS-K3B501SX Swing Barrier Quick Start Guide Note Make sure no persons are in the lane when powering on the device. 6.4 Switch to RS-485/RS-232 Mode Take the Serial Port 4 and on the access control board as an example. If the Jumper cap's position is like the picture displayed below.

  • Page 51: Alarm Relay Output Mode (No/Nc)

    DS-K3B501SX Swing Barrier Quick Start Guide Figure 6-4 Pin Appearance The jumper cap's position of barrier opening for entrance (NO) is as below: The jumper cap's position of barrier opening for exit (NO) is as below: The jumper cap's position of barrier closing for entrance (NC) is as below: The jumper cap's position of barrier closing for exit (NC) is as below: 6.5.2 Alarm Relay Output Mode (NO/NC)
  • Page 52 DS-K3B501SX Swing Barrier Quick Start Guide Alarm Relay Output Mode (NC):...

  • Page 53: Chapter 7 Activation

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 54: Activate Device Via Client Software

    DS-K3B501SX Swing Barrier Quick Start Guide Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.
  • Page 55 DS-K3B501SX Swing Barrier Quick Start Guide Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 56: Appendix A. Tips For Scanning Fingerprint

    DS-K3B501SX Swing Barrier Quick Start Guide Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 57 DS-K3B501SX Swing Barrier Quick Start Guide Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again.

  • Page 58: Appendix B. Dip Switch

    DS-K3B501SX Swing Barrier Quick Start Guide Appendix B. DIP Switch B.1 DIP Switch Description The DIP switch is on the main lane control board. No.1 to No 8 is from the low bit to the high bit. When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off. If you set the DIP switch like the figure displayed below, its binary value is 00001100, and its decimal value is 12.
  • Page 59 DS-K3B501SX Swing Barrier Quick Start Guide Device Mode Function Decimal Value DIP Switch Address Diagram Memory Mode Enable Memory Mode Disable Memory Mode Keyfob Paring Enable Keyfob Mode Paring Mode Disable Keyfob Paring Mode 5 to 8 Passing Mode Controlled Bi-...
  • Page 60 DS-K3B501SX Swing Barrier Quick Start Guide Device Mode Function Decimal Value DIP Switch Address Diagram Prohibit Entrance and Controlled Exit Prohibit Entrance and Free Exit...

  • Page 61: Appendix C. Event And Alarm Type

    DS-K3B501SX Swing Barrier Quick Start Guide Appendix C. Event and Alarm Type Event Alarm Type Tailgating Visual and Audible Reverse Passing Visual and Audible Force Accessing None Climb over Barrier Visual and Audible Overstay Visual and Audible Passing Timeout None...

  • Page 62: Appendix D. Table Of Audio Index Related Content

    DS-K3B501SX Swing Barrier Quick Start Guide Appendix D. Table of Audio Index Related Content Index Content Authenticated. Card No. does not exist. Card No. and fingerprint mismatch. Climbing over the barrier. Reverse passing. Passing timeout. Intrusion. Force accessing. Tailgating. No permissions.

  • Page 63: Appendix E. Error Code Description

    DS-K3B501SX Swing Barrier Quick Start Guide Appendix E. Error Code Description The swing barrier will display the error code on the seven-segment display if error occurred. Refer to the table below to find the description of each number. Error Reason...
  • Page 64 DS-K3B501SX Swing Barrier Quick Start Guide Error Reason Code Error Reason Code Lower Second IR Beam Obstruction Triggered Lower Third IR Beam Triggered 19 Exceeding Studying Range Lower Fourth IR Beam Motor Exception Triggered...

  • Page 65: Appendix F. Communication Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure F-2 Device Command...
  • Page 66 UD22503B-C...

This manual is also suitable for:

Ds-k3b501sx-lDs-k3b501sx-mDs-k3b501sx-r

Table of Contents