Table of Contents
Advertisement
8. DIAL AND BUTTONS
8.1 Introduction
The options/functions are
not available with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set incompatible options/
functions.
8.2 Temperature
When you select a washing programme,
the appliance automatically proposes a
default temperature. Touch this button
repeatedly until the indicator of the
desired temperature value comes on.
When the indicator
appliance does not heat the water.
8.3 Spin
With this option you can change the
default spin speed. The indicator of the
set speed comes on.
Additional spin options:
• Decrease the spin speed.
• No Spin
comes on.
Set this option to deactivate all spin
phases. The appliance performs only
the draining phase of the selected
washing programme. Set this option
for very delicate fabrics. The rinse
phase uses more water for some
washing programmes
• Rinse Hold
comes on.
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum.
The door stays locked and the drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
comes on, the
. The related indicator
. The related indicator
If you touch the Start/Pause
button, the appliance performs the
spinning phase and drains the water.
The appliance empties the
water out automatically after
approximately 18 hours.
8.4 Prewash
With this option you can add a prewash
phase to a washing programme.
The relevant indicator illuminates.
• Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust, mud and other
solid particles.
This option can increase the
programme duration.
8.5 Delay Start
With this option you can delay the start of
a programme to a more convenient time.
Touch the button to set the required
delay. The programme can be delayed
by 9, 6 or 3 hours.
The indicator of the option and the
indicator of the set value are on.
8.6 Extra Rinse
With this option you can add a few rinses
according to the selected washing
programme. The corresponding indicator
illuminates.
Use this option for people with allergies
to detergent residues and with sensitive
skin.
This option increases the
programme duration.
8.7 Quick
With this option you can decrease the
programme duration.
ENGLISH
13
Advertisement
Table of Contents
