Table of Contents
Advertisement
7.4 Multilingual badges
Adhesive badges in different languages are
supplied with the appliance.
The desired badge can be glued next to the
programme dial.
8. DIAL AND BUTTONS
8.1 Introduction
The options/functions are not available
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set
incompatible options/functions.
8.2 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy consumption,
you may need to activate the appliance
again.
14
ENGLISH
Add garments indicator. Lights on during the beginning of the Wash phase, while
the user can still pause the appliance and add more laundry.
Drum clean indicator.
Night indicator.
Rinse Hold indicator.
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
8.3 Temp.
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Touch this button repeatedly until the desired
temperature value appears on the display.
When the display shows the indicators
the appliance does not heat the water.
8.4 Spin
When you set a programme, the appliance
automatically sets the maximum spin speed
allowed, except for programme Denim. With
this option you can change the default spin
speed.
Touch repeatedly this button to:
• Decrease the spin speed. The display
shows only the spin speeds available for
the set programme.
,
Advertisement
Table of Contents
