Table of Contents
Advertisement
The appliance drains and
spins automatically after
approximately 18 hours
(except for Wool
programme).
12.11 Stand-by
Some minutes after the end of the
washing programme, if you do not
deactivate the appliance, the energy
saving status activates.
The energy saving status decreases the
energy consumption when the appliance
is on the stand by.
13. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
13.1 The laundry load
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that
are on the laundry care labels.
• Do not wash white and coloured items
together.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
• Turn multilayered fabrics, wool and
items with painted illustrations inside
out.
• Wash and pre-treat heavy soil stains
with a suitable detergent before
putting in drum.
• Be careful with the curtains. Remove
the hooks and put the curtains in a
washing bag or pillowcase.
• Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights,
shoelaces, ribbons, etc. ).
• All indicators go off.
• The indicator of the
slowly .
• Press one of the options to deactivate
the energy saving status.
If you set a programme or an
option that ends with water
in the drum, the energy
saving status function
doesn't activate to remind
you to drain the water.
• A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:
- interrupt the programme and open
the door (refer to "Daily Use" chapter);
-manually redistribute the load so that
the items are spaced evenly around
the tub;
-press the Start/Pause button. The
spin phase continues.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts,
cords, shoelaces, ribbons and any
other loose elements.
• Empty the pockets and unfold the
items.
ENGLISH
21
flashes
Advertisement
Table of Contents
