Electrolux EW6S4225C4 User Manual page 8

8 www.electrolux.com
4. Put the front polystyrene packaging
element on the floor behind the
appliance. Carefully put down the
appliance onto its rear side.
5. Remove the polystyrene protection
from the bottom.
6. Remove the bottom cover from the
worktop. Using clips fix, that you find
in the user manual bag, attach the
cover to the bottom of the appliance.
7. Put the appliance back into an
1
8. Remove the four transit bolts and pull
2
9. Put the plastic caps, that you find in
upright position. Remove the power
supply cable and the drain hose from
the hose holder.
WARNING!
It is possible to see
water flowing from the
drain hose. This is
because the washing
machine has been
tested at the factory.
out the plastic spacers.
the user manual bag, in the holes.
2
1