Macros; Edit Macro Definition - Nuvo Concerto NV-I8DMS User Manual

Screen 3.1
An important feature of the "Select Source" window is
the "Gain" level control. Different pieces of source
equipment tend to have different levels of audio output
signal. This slider control allows you to compensate for
equipment that has an inherently lower volume level.
By using this adjustment, when switching between
sources, relative volume levels remain constant.
When the appropriate information has been complet-
ed, click "OK." This will add the updated source infor-
mation to the "Source" window. When all the desired
sources have been defined, go to "Next" and proceed to
the "Macros" setup.
4. 0

Macros

Each source defined in the "Source" step has a separate
display pad definition. The "Source to View" pull-down
menu provides the display name given to each source.
Using the "Next" and "Back" buttons will automatically
cycle through all defined sources.
Screen 4.0
For each source, there can be up to 35 keys defined.
The Volume, Source, Mute, and Menu buttons cannot
be defined. The Power button has both an On and Off
macro. Each of the number keys has a dual function.
Pressing the "HotKey" at the bottom right of the
Display Pad accesses the second level of function. This
key is also labeled "Menu." A single press of the
"HotKey" and then any number key automatically puts
that key in its secondary functionality. This is noted
on the "Macros" screen with an (Hkey) designation.
If the component had default keys defined in the IR
Library, single IR code macros will be automatically
created for each key. Hovering the mouse over each key
in the Display Pad picture on the left side of the screen
will bring up a tool-tip displaying the name of the
macro assigned to that key. Clicking on the key high-
lights the macro on the right side of the screen.
Double-clicking on a key in either display will begin
editing the macro associated with that key.
4.1

Edit Macro Definition

All the source function and numeric keys on the
Display Pad have the ability to initiate a string of mul-
tiple commands when the button is pushed. The "Edit
Macro Definition" window is where the specific order
of commands and necessary delays are set.
Screen 4.1
The tree in the left-hand window displays all available
IR codes from the library. The tree is automatically
expanded to show the codes from the component asso-
ciated with the source.
18