Specifications - Eastwood Elite QST-30 Instructions Manual

The EASTWOOD ELITE QST 30/60
sound and vibration levels while producing much greater air output with lower power demands than old technology, conventional piston-type air compressors.
The unique Scroll pump design also has far fewer moving parts and significantly reduced friction for greater reliability and longer life.
CONTENTS
(1) Eastwood Elite QST 30/60 Scroll Type Air Compressor
MOISTURE CATCH SYSTEM HARDWARE
(1) 500ml clear, oil and moisture resistant Bottle
(1) Lid Assembly (includes: Metal Outer Lid, Lid Liner, Gasket, Hardware)
(1) 90° Brass Barbed Fitting
(3) M5x0.80x20 Phillips Round Head Screws with Lock Washers, Washers and Nuts, (1) set installed in Lid Assembly

SPECIFICATIONS

Power Requirement:
Full Load Amps:
Motor Horsepower:
Tank Size:
Tank Fill Time:
Air Delivery:
Cut-in Pressure:
Cut-out Pressure:
Max. Pressure:
Pressure Relief Valve Setting:
Motor and Scroll Pump RPM:
Scroll Pump Oil Capacity (Oil Change):
Sound Reading, Running, @ 3.2 ft [1m]: 63 dB
Power Cord:
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
2
AIR COMPRESSOR has been engineered and developed using breakthrough Scroll Pump Technology. It operates at lower
®
208/240V, 60Hz, Single Phase
17
4 hp
26.4 gallon [100 liter]
3 minutes max.
12.7 SCFM @ 90 PSI
115 PSI [7.9 bar]
145 PSI [10 bar]
145 PSI [10 bar]
160 PSI [11 bar]
1750
60 ounces [1.77 liter]
+
/- 5%*
6ft, 3-conductor grounded, 10 AWG
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com