Page 7
drugs, alcohol or medication. A moment of PRODUCT SAFETY inattention while operating power tools may result in serious personal injury. GENERAL POWER TOOL b) Use personal protective equipment. Always wear eye protection. Protective equipment SAFETY WARNINGS such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
DRILL SAFETY WARNINGS power tool’s operation. If damaged, have the power tool repaired before use. Many 1) Safety instructions for all operations accidents are caused by poorly maintained power tools. a) Wear ear protectors when impact drilling. f) Keep cutting tools sharp and clean. Properly Exposure to noise can cause hearing loss.
Page 9
Recharge only with the charger specified by WORX. Do not use any charger other Do not expose to rain or water. than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
TECHNICAL DATA Type WX354 WX354.1 WX354.9 (3-designation High speed of machinery, representative of Battery- powered Drill) WX354 WX354.1 WX354.9 Low speed Rated voltage Max** No load speed 0-600/0-2000/min Impact rate 0-1800/0-6000bpm Lock Clutch setting 18+1+1 positions Max torque 60N.m Waste electrical products must not be...
Page 11
Damage to the Chuck or a loose bit may cause possible personal injury. ACCESSORIES --Removing the bits See Fig. B1 --Inserting the bits See Fig. B2 WX354 WX354.1 WX354.9 Assembling the belt hook and See Fig. C1, C2, Masonry drill bit clip...
force). Position is for drill operation. Position FUNCTION MODE is for hammer drill operation. Regulate the Torque SELECTION Adjustment Ring to a higher position to reach the SCREWDRIVING, See Fig. F1, F2, F3 best result (See G). DRILLING, HAMMER DRILLING 3.
DECLARATION OF CONFORMITY POSITEC Germany GmbH Grüner Weg 10, 50825 Cologne, Germany Declare that the product Description Battery-powered Drill Type WX354 WX354.1 WX354.9 (3-designation of machinery, representative of Battery- powered Drill) Function Drilling Complies with the following Directives: 2006/42/EC 2011/65/EU...