Table of Contents
Advertisement
.
.
A.3
Personal protection equipment
Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the appliance's service life.
Stage
Transport
Handling
Unpacking
Installation
Normal use
Adjustments
Routine cleaning
Extraordinary
cleaning
Maintenance
Dismantling
Scrapping
Key:
●
○
—
1.
During these operations, gloves must be cut-resistant. Failure to use the personal protection equipment by operators, specialized personnel or users can
involve exposure to damage to health (depending on the model).
2.
During these operations, gloves must protect hands from the cold tray when being removed from the appliance. Failure to use the personal protection
equipment by operators, specialised personnel or users can involve exposure to chemical risk and cause possible damage to health (depending on the model).
3.
During these operations, gloves must be suitable for contact with chemical substances used (refer to the safety data sheet of the substances used for
information regarding the required PPE). Failure to use the personal protection equipment by operators, specialized personnel or users can involve exposure to
chemical risk and cause possible damage to health (depending on the model).
A.4
General safety
• The appliances are provided with electric and/or mechanical safety devices for protecting workers and the appliance itself.
• Never operate the appliance, removing, modifying or tampering with the guards, protection or safety devices.
• Do not make any modifications to the parts supplied with the appliance.
• Several illustrations in the manual show the appliance, or parts of it, without guards or with guards removed. This is purely for
explanatory purposes. Do not use the appliance without the guards or with the protection devices deactivated.
• Do not remove, tamper with or make illegible the marking and safety, danger and instruction signs and labels on the appliance.
• The A-weighted emission sound pressure level does not exceed 70 dB(A).
• Carefully avoid exposure of the equipment to ozone - do not use ozonizers in the rooms where the equipment is installed.
• The following operations have to be carried out by specialised authorised personnel or Customer Care Service provided with all
the appropriate personal protection equipment (A.3 Personal protection equipment), tools, utensils and ancillary means, who can
ask the manufacturer to supply a servicing manual:
– Installation and assembly
– Installation of the refrigerant fluid condensing unit
1.
The noise emission values have been obtained according to EN ISO 11204. The value could increase depending on the workplace where
measured.
Ventilation type
None= standard (upper ventilation) / M= Marine (frontal ventilation)
Refrigerant type
None = built-in cooling unit R134a or R404a
R= remote cooling unit
HC= built-in cooling unit R290
Protective
Safety footwear
garments
—
—
—
—
●
○
○
○
○
○
○
PPE REQUIRED
PPE AVAILABLE OR TO BE USED IF NECESSARY
PPE NOT REQUIRED
ON
OFF
Gloves
●
○
●
○
●
○
●
●
1
●
●
2
●
—
●
●
1
3
ˉ
●
●
1
3
ˉ
●
○
●
○
●
○
Disconnect the appliance from the power supply before
carrying out any installation, assembly, cleaning or
maintenance procedure.
1
Glasses
Safety helmet
○
—
—
—
—
—
—
—
—
—
—
—
○
—
○
—
—
—
○
—
○
—
21
Advertisement
Table of Contents
