Table of Contents
Advertisement
The meaning of the various information given on it is listed
below:
F.Mod. .................................factory description of product
Comm.Model ........................ commercial description
PNC ....................................production number code
Ser.No. ................................. serial number
220V 1N .............................. power supply voltage
60 Hz ................................. power supply frequency
0.15 kW .............................. max. power input
Cyclopentane..........................expanding gas used in insulation
Total Current......................... current absorbed
Defrost Power ....................... defrost power
Evaporation Heating Element.... heating element power
Lighting.................................. internal light power
Class.................................. climatic class
Refrigerant............................ type of refrigerant gas
Cap..................................... nominal capacity
IP21 ....................................dust and water protection
CE ....................................... CE marking
Electrolux Professional SPA
Viale Treviso, 15
33170 Pordenone
(Italy).................................... Manufacturer
When installing the appliance, make sure the electrical
connection is carried out in compliance with that specified on the
dataplate.
ATTENTION!
Do not remove, tamper with or make the machine
"CE" marking illegible.
ATTENTION!
Refer to the data given on the machine "CE"
marking for relations with the Manufacturer (e.g.
when ordering spare parts, etc.).
ATTENTION!
When scrapping the machine, the "CE" marking
must be destroyed.
A.1.7 APPLIANCE IDENTIFICATION
This manual applies to various refrigerator/freezer models. For
fur ther details regarding your model, refer to par. A.2.2
DIMENSIONS, PERFORMANCE AND CONSUMPTION.
A.1.8 COPYRIGHT
This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional SPA.
A.1.9 RESPONSIBILITY
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in the
spare parts catalogue (the fitting and use of non-original spare
parts and accessories can negatively affect machine
operation and invalidates the warranty);
• operations by non-specialised technicians;
• unauthorised modifications or operations;
• inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and untrained personnel;
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
rating
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
Electrolux Professional SPA declines any liability for any
inaccuracies contained in the manual, if due to printing or
translation errors.
Any supplements to the installation, use and maintenance
manual the Customer receives from the Manufacturer will form
an integral part of the manual and therefore must be kept
together with it.
A.1.10 PERSONAL PROTECTION EQUIPMENT
Give below is a summary table of the Personal Protection
Equipment (PPE) to be used during the various stages of the
machine's service life.
Protective
Safety
garments
footwear
Stage
X
Transport
X
Handling
Unpacking
X
X
Assembly
X
X
Normal use
X
Adjustments
Routine
X
cleaning
Extraordinary
X
cleaning
X
Maintenance
X
Dismantling
X
Scrapping
Key:
X
PPE REQUIRED
PPE AVAILABLE OR TO BE USED IF NECESSARY
PPE NOT REQUIRED
(*) During Normal use, gloves protect hands from the cold tray
when being removed from the appliance.
NOTE: The gloves to be worn during Cleaning are the type
suitable for contact with the cooling fins (metal plates).
Failure to use the personal protection equipment by operators,
specialised technicians or users can involve exposure to
chemical risk and possible damage to health.
A.1.11 KEEPING THE MANUAL
The manual must be carefully kept for the entire life of the
machine, until scrapping.
The manual must stay with the machine in case of transfer,
sale, hire, granting of use or leasing.
A.1.12 RECIPIENTS OF THE MANUAL
This manual is intended for:
• the carrier and handling personnel;
• installation and commissioning personnel;
• the employer of machine users and the workplace manager;
• operators for normal machine use;
• specialised technicians - after-sales service (see service
manual).
30
Ear
Gloves
Glasses
Mask
protectors
X (*)
X (*)
X
Safety
helmet
Hide quick links:
Advertisement
Table of Contents
