Table of Contents
Advertisement
NOTE!
After carrying out the below operations, the holes
in the appliance must be closed with the special
plastic plugs.
In case of installation on a concrete plinth, make 2
holes in the floor near the bottom hinge fixing
screws.
F
MACHINE DISPOSAL
WARNING
Refer to "Warning and Safety
Information".
F.1
Procedure regarding appliance disposal
At the end of the product's life-cycle, make sure it is not
dispersed in the environment.
Different regulations are in force in the various countries,
therefore comply with the provisions of the laws and compe-
tent bodies in the country where appliance disposal takes
place.
30
Det. 3
Det. 4
D
Det.5
Before disposing of the appliance, make sure to carefully
check its physical condition, and in particular any parts of the
structure that can give or break during dismantling.
The appliance's parts must be disposed in a differentiated way,
according to their different characteristics (e. g. metals, oils,
greases, plastic, rubber, etc.) remembering that the compres-
sor contains lubricant oil and refrigerant fluid which can be
recycled, and that the refrigerator components are special
waste assimilable with urban waste.
Depending on the model, the doors must be removed before
dismantling the appliance.
A
B
G
Advertisement
Table of Contents
