Schwank Epic14 Series Installation Manual page 13

Concealed Backplate Wall Mount Kit
The wall mount consists of two pieces, a plate that extends
the whole length of the air curtain and a bracket that
attaches to the air curtain. The back side of the plate has
six mounting holes capable of accepting six 3/8 mounting
bolts with washers. Mark and pre-drill the mounting surface
accurately. First, fasten the plate to the wall, then Attach
the brackets to the top of the air curtain using Eight (Twelve
for 108" unit) threaded inserts present.
Lift and anchor the air curtain with a bracket attached to it
on the plate fastened to the wall.
Concealed Backplate JC-0953-XX
Vertical Floor Mounting Kit
The vertical mount consists of two pieces, a base bracket
and a vertical wall mount bracket. The base bracket is
attached to the floor using 3/8 fasteners appropriate to the
surface mounted to. The wall bracket is attached to the
two threaded inserts on top of the air curtain with 3/8 bolts
and washers, then to the base bracket with 3/8 bolts and
washers. To secure the air curtain from the wall, the back side
of the vertical wall mount has two mounting holes capable
of accepting three 3/8 mounting bolts with washers. Mark
and pre-drill the mounting surface accurately.
All Units may be mounted vertically. For vertical mounting, all
units must be ordered with a vertical kit from the factory.
The side of the door that the unit will be installed when facing
the door (Left or Right) determines the Kit ordered. All units
vertically mounted must be secured from the wall as well as
the ground.
Vertical Mounting Kit JC-0954-KR – Right
Vertical Mounting Kit JC-0954-KL – Left
schwankgroup.com/schwankair