Advertisement
ME-1245; Ballistic Cart Accessory Battery Replacement Instructions
Battery part number: PS-3297; Li-Poly 500mAH
Recommended Equipment: Phillips Screwdrivers
Step 1:
Position the Sensor on a surface as shown. Note the location of the (2) Thumb
Screws. Note also there are captive rubber washers on the opposite side.
PASCO Form Number
Description
Date
Revision
013-17439
ME-1245 Battery Replacement Instructions
12-07-22
Page 1 of 4
A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PASCO ME-1245
Summary of Contents for PASCO ME-1245
- Page 1 ME-1245; Ballistic Cart Accessory Battery Replacement Instructions Battery part number: PS-3297; Li-Poly 500mAH Recommended Equipment: Phillips Screwdrivers Step 1: Position the Sensor on a surface as shown. Note the location of the (2) Thumb Screws. Note also there are captive rubber washers on the opposite side.
- Page 2 Phillips Screwdriver and remove it from the unit. Note: you might have to flip the unit over to allow the spring to fall out. PASCO Form Number Description Date Revision 013-17439 ME-1245 Battery Replacement Instructions 12-07-22 Page 2 of 4...
- Page 3 -Turn the Spring Screw assembly fully in until it bottoms out, and then turn back out 1.5 turns. -Fully reinsert the (2) Thumb Screws and slide the captive rubber washer flush with the plastic as shown below. PASCO Form Number Description Date Revision 013-17439 ME-1245 Battery Replacement Instructions 12-07-22 Page 3 of 4...
- Page 4 If you need further assistance, please contact Technical Support at support@pasco.com www.pasco.com through on chat. To access chat through your browser, please enable all cookies on our website. PASCO Form Number Description Date Revision 013-17439 ME-1245 Battery Replacement Instructions 12-07-22 Page 4 of 4...
Need help?
Do you have a question about the ME-1245 and is the answer not in the manual?
Questions and answers