Page 1
PS‐3228; Wireless Soil Moisture Sensor Battery Replacement Instructions Reference: Battery part number 540‐115; Li‐Poly 300 mAH Recommended Equipment: (PS‐3299; Battery Replacement Tool Set) Step 1: Position the Sensor on a surface as shown. Unscrew and remove the 4 Torx Screws with the T5 Screwdriver PASCO Form Number Description Date Revision 013-17365 PS-3228 Battery Replacement Instructions 05-05-22 Page 1 of 3 ...
Page 2
Step 2: Flip the unit over and position as shown. Step 3: Separate the two halves as shown. PASCO Form Number Description Date Revision 013-17365 PS-3228 Battery Replacement Instructions 05-05-22 Page 2 of 3 ...
Page 3
Step 4: Remove the battery hold down cover by removing the 2 screws with the Torx T5 Screwdriver. Unplug the battery and set aside. Step 5 : Replace the old battery with the replacement battery. Plug in the battery and reverse all steps to reassemble the unit. Dispose of the old battery properly per the instructions. If you need further assistance, please contact Technical Support at support@pasco.com or through www.pasco.com on chat. To access chat through your browser, please enable all cookies on our website. PASCO Form Number Description Date Revision 013-17365 PS-3228 Battery Replacement Instructions 05-05-22 Page 3 of 3 ...
Need help?
Do you have a question about the PS-3228 and is the answer not in the manual?
Questions and answers