Omron V330-F Series Connection Manual page 10

・ Configuration with V430-F
PC
(OS: Windows 10,
CX-One Installed)
USB cable
Manufact
urer
OMRON CPU Unit
OMRON Ethernet Unit
OMRON Power Supply Unit
OMRON CX-One
OMRON CX-Programmer
OMRON CX-Protocol
OMRON CX-Protocol Project File
(Ladder Program)
--- PC (OS: Windows 10)
--- USB cable
(USB 2.0-compliant B-type connector)
--- LAN cable (STP (shielded, twisted-
pair) cable of Ethernet category 5 or
higher)
OMRON Code reader
OMRON I/O Cable
OMRON Ethernet cable
--- 24 VDC power supply (for switching
hub)
--- 24 VDC power supply (for code reader) ---
Precautions for Correct Use
Obtain the latest version of the above protocol macro data in advance.
(Contact OMRON for information on how to obtain these files.)
Precautions for Correct Use
This document assumes that the USB is used to connect a CJ2 CPU Unit. For information on
how to install the USB driver, refer to the CX-Programmer Operation Manual (Cat. No. W446).
5. Applicable Products and Support Tools
CJ2M-CPU11
CJ1W-ETN21
Switching hub
(W4S1 -05C)
LAN cable
Name
V430-F000M12M-SRX
Ethernet cable
V430-WE-3M
I/O Cable
V430-W8-3M
24 VDC power supply
Model
CJ2M-CPU11
CJ1W-ETN21
CJ1W-PA202
CXONE-AL□□C-V4
/AL□□D-V4
(Included with CX-One)
(Included with CX-One)
OMRON_V330_V430_C
J_ETN(TCP)_V1_00.cxp
---
---
---
V430-F000M12M-SRX
V430-W8-3M
V430-WE-3M
---
24 VDC power supply
Version
Ver. 2.0
Ver. 1.5
---
Ver. 4.□□
Ver. 9.72
Ver. 2.03
Ver. 1.00
---
---
---
Ver. 2.1.0
---
---
---
---
10