Ingeteam Sun Storage 1Play TL M Use And Settings page 14

Ingeteam
For example. In a storage system with 4 x A48100 batteries, the DIS Switches would have to be
placed as follows:
On the other hand, the ISS 1Play TL M requires a two-wire CAN cable. The wires can be
obtained by cutting the end of the Ethernet cable with the RJ45 connector.
It is necessary to identify which of the wires is pin 4 and pin 5. This can be done by viewing the
wire colors of pins 4 and 5 on the RJ45 that is connected to the battery. The following picture
shows the position of pins 4 and 5 of an RJ45 connector:
ABH2010IMC26_.docx
Use and settings of the INGECON SUN STORAGE 1Play TL M working with
B3/B4850/A48100/POWERBOX of DYNESS
14