Hi Testing - GN Resound ONE Technical Manual

HI Test - DSA6000
Doc 0428820 rev. B
Please also see GTO info doc "GI-01-10-002 – Guide to "WL Only test" - to be found on GTO web https://gto.gnresound.com
Use of test jig/fixture is mandatory during DSA6000 final HI testing. The HI fixture/jig is placed in the brown test frame. Place the HI in the fixture
according to pic and place it all in the test chamber as shown and select the correct test tpix. Make sure to follow instructions coming up on the
screen. During the test programme execution the IAD calibration will be performed at the appropriate time. Another benefit from the fixture is
that the HI is in a well defined position so the telecoil test can be performed without any interaction from the operator
2cc coupler 2cc coupler insert BTE Coupl Mic,TM-12,measured
p/n 30-4838800 p/n 40B4609601 p/n 18220700
20 mm
Place the jig/frame with the HI in the ATC4000 test chamber as shown. The test tubing is normal 20 mm effective lenght as for all BTE testing
Page 14 of 15
Not subject to issue control when printed