Replacing Mic Filter - GN Resound ONE Technical Manual

Replacing Mic Filter

FILTER,MIC,CASE,8PCS
The mic filter tool has two functions:
A removal tip to take out the used
filter, and a repl tip with a new filter
Insert the other end of the tool (the end with
the replacement filter) into the mic opening
Open the filter box and take out one of the tools. Insert the removal tip into the used mic filter
and then pull the tool straight out. It is important to pull it straight and not on an angle
Gently press the repl filter straight into
the mic opening until the outer ring is
flush with the back of the hearing aid
Not subject to issue control when printed
Doc 0428820 rev. B
Pull the tool straight out – the new mic filter
should remain in place
Page 10 of 15