Test Equipment - GN Resound ONE Technical Manual

Test Equipment for the DSA6000
Please also see GTO info doc "GI-01-10-002 – Guide to "WL Only test" - to be found on GTO web
COUPL MIC,TM-12,
MEASURED
p/n 18220700 be ordered with GTO
Extension prog cable
p/n 17517800
Note about PROG. CABLE EXTENSION p/n 17517800:
The ext cable is needed for making correct current measurement during DSA6000 HI test on some platform
models. Testing these devices without the extension cable will show an incorrect current measurement.
However, if the ext cable is used during a DSA6000 HI test of a model where the ext cable is not needed,
it will not affect the test. Therefore, to avoid failures and misunderstandings it is safer just to leave the ext
cable on the DSA at all times and use it during test of all devices, no matter if it is required or not
2cc coupler 2cc coupler insert BTE
p/n 30-4838800 can p/n 40B4609601
can be ordered with
Dept / HQ DK GTO Dept / HQ DK
Connect the extension cable to the
prog cable and the DSA as shown
Not subject to issue control when printed
https://gto.gnresound.com
NOAHLINK WL CPD-1
p/n 20310800 for final HI DSA test for C70R&C80R
Doc 0428820 rev. B
EA TEST JIG,CAM80,DSA6000
p/n 22260400
Page 13 of 15