Sub Display Labeling And Color Coding; Amp Label; Cab Label; Alt Label - IK AmpliTube TONEX User Manual

AmpliTube TONEX Pedal
Press A+B to move a bank down.
Press B+C to move a bank up.
Press A+C to display current bank.
Footswitches by default work at release, disable BANK NAV in the GLOBAL SETUP to make them work at
push.

Sub display labeling and color coding

The sub display shows different colors and labels to help you monitor the selected PRESET's status.

AMP label

The AMP label can have 4 different statuses:
1. AMP (off): the AMP is bypassed on the selected PRESET.
AMP
2. (amber): the AMP is an AMP TONE MODEL.
AMP
3. (green): the AMP is a STOMP + AMP TONE MODEL.
AMP
4. (blue): the AMP is a STOMP TONE MODEL.

CAB label

The CAB label can have 5 different statuses:
1. CAB (off): the CAB is bypassed or empty on the selected PRESET.
CAB
2. (amber): the CAB is a CAB TONE MODEL.
CAB
3. (green): the CAB is a VIR cabinet.
CAB
4. (blue): the CAB is a custom IR.
CAB
5. (white): the CAB is globally bypassed.

ALT label

ALT
When the green label is on, the main knobs edit the alternative parameters (REVERB, COMPRESSOR,
NOISE-GATE, PRESENCE and DEPTH).

Lock mode

When performing you may want to lock the entire front panel to avoid unwanted parameter changes, but still
use the footswitches to move among PRESETs and BANKs.
To do so press the PRESET and PARAMETER encoders simultaneously. The display will show LOCKED and
from that moment all the knobs and encoders will be disabled.
To exit the LOCK MODE to edit your PRESETs press again the PRESET and PARAMETER encoders
simultaneously.
9
TONEX Pedal Overview