Setup; Preset Setup; Global Setup - IK AmpliTube TONEX User Manual

AmpliTube TONEX Pedal

Setup

Preset setup

1. EXT. CTRL – External control on/off: enables/disables the external pedal.
2. EXT.LEARN – External control learn: sets/removes a parameter's assignment to the control pedal.
3. AMP – Amp active/bypass: enables/bypasses the TONE MODEL's amp in the selected PRESET.
4. CAB – Cab active/bypass: enables/bypasses the TONE MODEL's cab in the selected PRESET.

Global setup

• NAMING – Naming format: sets the display's visualization of PRESET names.
∙ NAME: name only.
∙ PC+NAME: program change number and name.
∙ BNK+NAME: bank number and name.
• BANK NAV – Bank navigation on/off: enables/disables the bank navigation with footswitches.
∙ ON: press A+B to move a bank down, press B+C to move a bank up. Footswitches work at release.
∙ OFF: footswitches work at push. Bank up and down can still be performed with an external double switch
pedal.
• CAB – Global cabinet bypass: enables/disables the cabinet globally on all PRESETs.
∙ ACTIVE: the cab follows the PRESET settings.
∙ BYPASS: the cab is bypassed on all PRESETs
• USERMODE: sets the user mode for the pedal.
∙ EASY: reduced parameter list for easier browsing.
∙ ADVANCED: full parameter list for better tone control.
• EXT. CTRL – External control setup: sets the type of external control.
∙ TRS EXP: TRS expression pedal.
∙ RTS EXP: RTS expression pedal.
∙ N.O. SWITCH: Normally Open single switch pedal.
∙ N.C. SWITCH: Normally Closed single switch pedal.
∙ N.O. DUAL SWITCH: Normally Open double switch pedal.
∙ N.C. DUAL SWITCH: Normally Closed double switch pedal.
• DUAL SWITCH MODE – Dual switch operation: sets the external control pedal functionality.
∙ PRESET: use the double switch pedal to move PRESET up or PRESET down.
∙ BANK: use the double switch pedal to move bank up or bank down.
• EXP .CALIB – Expression pedal calibration: starts the process of calibrating an expression pedal.
• MIDI CH – MIDI channel selection: sets the MIDI channel on which the pedal operates.
∙ 1 – 16
• MIDI.THRU – MIDI through setup: sets the preferred MIDI functionality for the MIDI through.
∙ OFF: no MIDI signals are sent to TONEX's MIDI outputs.
18
Setup