Browse Tone Models; Edit The Amp Model; Edit The Cab Model - IK AmpliTube TONEX User Manual

AmpliTube TONEX Pedal

Browse TONE MODELs

To browse TONE MODELs inside the selected PRESET, use the MODEL encoder:
1. Press the MODEL encoder to open the TONE MODEL menu.
2. Rotate the MODEL encoder to browse TONE MODELs (combinations of stomps/amps and cabs).

Edit the AMP MODEL

To edit the AMP MODEL of the selected TONE MODEL, use the MODEL encoder:
1. Press the MODEL encoder to open the TONE MODEL menu.
2. Press the MODEL encoder to enter the AMP/CAB selection.
3. Press the MODEL encoder to enter the AMP menu.
4. Rotate the MODEL encoder to browse AMP MODELs.
Each AMP MODEL is automatically loaded while browsing to have instant feedback on its tone.
AMP MODELS are named after their TONE MODEL's name.

Edit the CAB MODEL

To edit the CAB MODEL of the selected TONE MODEL, use the MODEL encoder:
1. Press the MODEL encoder to open the TONE MODEL menu.
2. Press the MODEL encoder to enter the AMP/CAB selection.
3. Rotate the MODEL encoder once to select the CAB menu.
4. Press the MODEL encoder to enter the CAB menu.
5. Rotate the MODEL encoder to choose the CAB category (MODEL, VIR or IR).
6. Press the MODEL encoder to enter the chosen category.
7. Rotate the MODEL encoder to browse CAB models.
Each CAB MODEL is automatically loaded while browsing to have instant feedback on its tone.
CAB MODELS are named after their TONE MODEL's name.
A CAB can be of three categories:
• CAB MODEL: captured using TONEX Modeler
• VIR: a Volumetric Impulse Response technology built in the TONEX Ecosystem that models a Cabinet and
its mic placement.
• IR: in this category you can find all the imported Custom IRs using the Librarian. If you don't have any
Custom IR imported, this category is hidden.
11
Browse TONE MODELs