Banks & Presets; Bank Renaming; Preset Renaming & Saving - IK AmpliTube TONEX User Manual

AmpliTube TONEX Pedal
BANKs & PRESETs
PRESETs are the container of the complete signal chain that consists of:
• Noise Gate
• Compressor
• TONE MODEL
• Tone EQ
• Reverb
PRESETs are organized in BANKs; each BANK has three slots (A, B and C).
TONEX Pedal has 50 BANKs for a total of 150 PRESET slots.
To move a BANK down, press the A + B footswitches simultaneously.
To move a BANK up, press the B + C footswitches simultaneously.
To access the current BANK, press the A + C footswitches simultaneously.

BANK renaming

You can rename BANKs to better organize your library.
To rename the selected BANK:
1. Press A + C to access the BANK navigation mode in the current BANK (the LEDs blink amber).
2. Hold the PRESET encoder to access the BANK renaming mode.
3. Rotate the PRESET encoder to change character, rotate the MODEL encoder to move the cursor.
4. Press the PRESET encoder to confirm the BANK's name.
5. The BANK is correctly renamed.
PRESET renaming & saving
You can rename and change the PRESETs position to better organize your library by saving them.
To save the selected PRESET:
1. Hold the PRESET encoder to access the save mode.
2. The first letter of the name starts blinking indicating the cursor position.
3. Rotate the PRESET encoder to change character, rotate the MODEL encoder to move the cursor.
4. Press the PRESET encoder to confirm the name.
5. A location appears on screen indicating a number (BANK) and a letter (SLOT).
6. Rotate the PRESET encoder to choose a different location.
7. Press the PRESET encoder to confirm the location.
8. The display shows SAVED to confirm the saved PRESET.
13
BANKs & PRESETs