Parameters; Main Parameters; Alternative Parameters; Additional Parameters - IK AmpliTube TONEX User Manual

AmpliTube TONEX Pedal

Parameters

Main parameters

The main parameters are accessible using the main 5 knobs, these are:
• GAIN (0 – 10)
Adjusts the TONE MODEL's input gain. Use this parameter to saturate more or less your TONE MODEL.
• BASS (0 – 10)
Adjusts the level of low frequencies with a shelf EQ.
• MID (0 – 10)
Adjusts the level of mid frequencies with a bell EQ.
• TREBLE (0 – 10)
Adjusts the level of high frequencies with a shelf EQ.
• VOLUME (0 – 10)
Adjusts the master volume of the pedal. This volume is persistent across all the PRESETs, if you want to
adjust the volume of a single TONE MODEL use the TONE MODEL's volume (MODEL.VOL) inside the
additional parameters or if the compressor is set to post, use the compressor's gain (CMP GAIN).

Alternative parameters

The alternative parameters are accessible using the main 5 knobs by holding down the PARAMETER encoder
ALT
(the green label appears on screen), these are:
• REVERB MIX (0% – 100%)
Adjusts the reverb's mix.
• COMPRESSOR THRESHLD (0 dB – -40 dB)
Adjusts the compressor's threshold.
• NOISE-GATE THRESHLD (-100 dB – 0 dB)
Adjust the noise-gate threshold.
• PRESENCE (0 – 10)
Adjusts the high-frequency content.
• DEPTH (0 – 10)
Adjusts the low-frequency content.

Additional parameters

• MODEL.VOL (0 – 10)
TONE MODEL's volume
Adjusts the volume of the selected AMP TONE MODEL.
• NOISE GT (ON – OFF)
Noise-gate on/off
Activates or deactivates the noise-gate.
16
Parameters