Asio Drivers; Midi Specifications - IK AmpliTube TONEX User Manual

AmpliTube TONEX Pedal

ASIO Drivers

To use TONEX Pedal as an audio interface on Windows systems please install the ASIO drivers that you can find
in your User Area on ikmultimedia.com.

MIDI specifications

PRESETs are arranged in a grid of 50 numbered banks (00-49) with 3 PRESETs each (A, B and C) for a total of
150 PRESETs.
PRESET 00A = MIDI Program #0
PRESET 00B = MIDI Program #1
PRESET 00C = MIDI Program #2
PRESET 01A = MIDI Program #3
PRESET 01B = MIDI Program #4
PRESET 01C = MIDI Program #5
... up to MIDI Program #127
MIDI PATCH BANK 0 (CC#0 Value=0) = PRESETS 00A-41C
MIDI PATCH BANK 1 (CC#1 Value=1) = PRESETS 42A-49C
TONEX always powers up in MIDI Patch Bank 0, therefore if you stay withing the first 127 PRESETs (00A-63B),
simply send a standard MIDI Program Change message to load a PRESET.
If you plan to use PRESETs above the 127 th , you should send a standard MIDI Bank Change message (MIDI
CC# 0) with a value equal to the MIDI Bank you'd like to use before each MIDI Program Change.
MIDI Control Change Associations
Parameter
PRESET ON/OFF
Expression Pedal
MIDI Patch Bank
Each parameter is assigned to a control change as shown in the following tables. When a parameter range is
not linear its values are equally divided among the 128 steps of a Control Change value.
GAIN
BASS
MID
TREBLE
VOLUME
23
Control Change #
12
11
0
MAIN PARAMETERS
#102
#23
#24
#25
-
Values
OFF = 0, ON = 127
0 – 127
0 – 1
Interface mode