Expression Pedal Calibration; Double Switch - IK AmpliTube TONEX User Manual

AmpliTube TONEX Pedal
The only difference between a single switch or an expression pedal is that with the first one changing from
position A to position B is an instant transition (pressing the footswitch), while the second one is a smooth
transition (moving the expression pedal).

Expression pedal calibration

If you feel that your expression pedal doesn't work as expected, you may need to calibrate it to get its full
functionality.
To calibrate an expression pedal do as follows:
1. Hook it up to the EXT. CONTROL in the rear panel.
2. Hold the MODEL encoder and choose GLOBAL SETUP .
3. In the GLOBAL SETUP select EXP .CALIB.
4. While HEEL is being displayed move your expression pedal to its heel position then press the MODEL
encoder to confirm.
5. While TIP is being displayed move your expression pedal to its tip position then press the MODEL
encoder to confirm.
6. When the display shows DONE, the calibration is set.

Double switch

Connect a Double Switch pedal to the EXT. CONTROL to browse among PRESETs or BANKs more easily.
To setup a Double Switch pedal do as follows:
1. Hook it up to the EXT. CONTROL in the rear panel.
2. Hold the MODEL encoder and choose GLOBAL SETUP .
3. Select EXT. CTRL and choose N.O. DUAL SWITCH, if your double switch pedal is normally open or
N.C. DUAL SWITCH, if your double switch pedal is normally closed.
4. In the GLOBAL SETUP browse to DUAL SWITCH MODE and choose BANK, if you want to use your
double switch pedal to move among BANKs or PRESET, if you want it to move among PRESETs.
21
External control setup