The Ks Synth General Settings; Saving The Ks Synth General Settings - Novation X-Station User Manual

THE KS SYNTHESIZER
The KS Synth General Settings - Saving The KS Synth General Settings

The KS Synth General Settings

In KS Synth Mode, there are some settings which are common across
all 200 Synth patches, that is to say they affect all of the Synth patches
in the same way. These settings are :
The Audio settings for Channel 1 (the KS Synth Effects use Channel 2
and can be unique for each Synth patch).
The operation of the Footswitch.
The operation of the Expression Pedal.
The operation of the Pitch Bend / Modulation joystick.
The operation of the Touchpad.
The function of the Transport buttons.
The function of the SELECT and CONTROL controls in the Effects sec-
tion of the front panel.
Except for the Audio Channel 1 settings, all of these features can be re-
programmed in a similar fashion to programming a control in Template
Edit Mode in a standard X-Station Template. Simply press the TEM-
PLATE EDIT button from within KS Synth Mode and edit the feature in
the normal way.
If re-programming these features, remember that they will behave in the
same manner across all Synth Patches.

Saving The KS Synth General Settings

When an edited Synth Patch is written to memory in the procedure
described on page 35, the General Settings are not included in the data
saved.
To save the KS Synth General Settings, press either the TEMPLATE
COMMON or TEMPLATE EDIT button from KS Synth Mode (the
appropriate button LED lights) and press the WRITE button. The display
shows :
Save General
Settings
Press the WRITE button to continue the saving process or the PLAY
button to abandon the save. If WRITE is pressed, the display shows :
TEMPLATE SAVED
and the KS Synth General Settings are stored. The KS Synth General
Settings can be thought of as residing in an additional 41st Template
memory which is referenced whenever a KS Synth Patch is being used.
• •
55