Templates; Part Settings - Novation SL Mk III User Manual

TEMPLATES

Each Part works within a Template . In other words, each Part uses a Template to determine which MIDI messages should
send for each control and on which MIDI Channel and output it should send those messages . You can access and edit
Templates in Templates view . To access Templates view, press the Shift + Sessions buttons (Templates appears above the
Sessions button) . A Template determines the type of MIDI message sent from each control . The Template contains mapping
data for:
• 16 Rotary Knobs (across two pages)
• 16 Pads (both hit and pressure)
• 8 Faders
• 16 Buttons
• The Modulation Wheel
• Footswitch, Expression and Sustain Pedals
You can manage and design custom Templates with Components; a standalone application available here:
With Components, you can configure each control to send one of many different MIDI messages with different ranges,
values and behaviours .
If a mapping is not enabled, the LED or screen associated with the control will be blank to show it is disabled
When a control with a mapping moves, a notification will appear on the far-right screen showing the message type as well
as the associated value (e .g .,0-127) .

Part Settings

The SL MkIII lets you customise the destination of your Parts . The SL MkIII has eight Parts each with its own sequencer,
template, destination and more as explained in this section . You can configure elaborate setups using up to 16 external
devices or software . You can set these configurations with 'Templates' through the following process .
INCONTROL Tempo
Zones
Sequencer
Scales
Arp Latch
components .novationmusic .com
Grid
Options
13