Bay Networks 5393 User Manual page 52

Release 5.1 Supplement for Remote Annexes
119346-A Rev. A
34
MP Stop
The Remote Annex creates a log entry whenever an MP bundle is
destroyed. For MMP, this will be logged only on the LNS. In this case,
Acct-Status-Type (40) = MP-Stop [VSE Bay Networks 14]. The
Remote Annex also includes the following attributes, when applicable,
in this log:
• NAS-IP-Address (4)
• NAS-Port (5) = MP [6000] + index
• Acct-Delay-Time (41)
• Acct-Multi-Session-Id (51)
• NAS-Port-Type (61) = Virtual [5]
Time Stamps and Session Duration
Each RADIUS Accounting record is queued with a timestamp indicating
when the event occurred. Whenever a RADIUS Accounting-Request is
issued by the Remote Annex, the Remote Annex records the difference
in time (now - occurrence) and places the result in the Acct-Delay-Time
(41) attribute.
Each session in the Remote Annex retains a timestamp of the start of the
session. When the session ends, the Remote Annex records the difference
in time (finish - start) and places the result in the Acct-Session-Time (46)
attribute.
Session Throughput
Each session in the Remote Annex tracks the packet and byte throughput
of each session associated with a physical line. When the session ends,
the Remote Annex records these statistics and places the results in the
Acct-Input-Octets (42), Acct-Output-Octets (43), Acct-Input-
Packets (47), and Acct-Output-Packets (48) attributes.