Advertisement
VLT® Control Panel LCP
Installation Guide
2 Installation
2.1 Mounting the LCP
Taking LCP 32 as an example, the following steps describe how to install the LCP in a drive.
Procedure
1.
Position the bottom of the LCP in the drive.
2.
Push the top of the LCP into place.
When mounting the LCP, do not push or press too hard!
-
If it is not possible to mount the LCP in one easy operation directly on the drive, try to insert LCP before mounting
the terminal cover. When the terminal cover is removed and the drive is powered, do not touch the power termi-
nals.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogs, brochures, and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already
agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | Danfoss A/S © 2021.03
C A U T I O N
*130R0961*
*M0027201*
Installation
AN359636476228en-000201 / 130R0961
Advertisement
