Safety Precautions; Environmental Protection; Warranty And Technical Support - Pro AQ180G Manual

SAFETY PRECAUTIONS

- DO NOT stare directly into the laser beams.
- DO NOT aim the laser beam at humans or animals.
- DO NOT attempt to¬ repair or otherwise alter this device. Otherwise you will void the product
warranty and expose the device operator to serious hazards. If the device requires repairs, contact
your local dealer.
- DO NOT modify the beam in any way by using other optical instruments.
- DO NOT remove any labels from the instrument.
- USE only battery types specified by the manufacturer.
SERVICING AND MAINTENANCE
- The crossline laser device must be protected against strong atmospheric precipitation during
use in the open space.
- If the device gets wet, wipe it thoroughly before inserting it into the case. Failure to do so may damage
the internal installations of the device.
- Do not use gasoline, paint thinner, any other solvents, toilet paper or tissues to clean the device,
in particular the laser emitter windows. Otherwise, scratching or damage may occur and, as a
consequence, the device may be de-calibrated.
- If the device is damaged mechanically it may lose its measuring properties.
- Protect the self-leveling mechanism by switching off the device during transportation and after work.
- In the event of a suspicion of recalibration, it is recommended to return the device to the manufacturer
for recalibration in order to restore the original technical parameters.

ENVIRONMENTAL PROTECTION

The device should be subjected to appropriate disposal processes. For this purpose, the used device
should be disposed of at a special collection point for this type of waste. For more information
contact PRO sp. z o.o. representative or the local authorities responsible for waste management.

WARRANTY AND TECHNICAL SUPPORT

The warranty provided by PRO for batteries
and chargers is 6 months and starts from the
date of purchase. For warranty and service
support purposes, please contact your local
dealer.
10 ver. 2.1
PRO sp. z o.o.
ul. Strażacka 76, 43-382 Bielsko-Biała, POLAND
tel. +48 33 818 39 09, VATUE 6441423158
www.firma-PRO.com