Nortel 1000 Quick Start Manual page 7

From a web browser, enter:
1
https://AG_ipAddress:9001
ipAddress is the IP address and 9001 is the administration port.
If a Security Alert dialog box appears, click Yes.
2
Click the Network tab.
3
Log in as root, and enter the root password (defaults to rootadmin).
4
On the Network > Interfaces page, define the External Public Address for Interface 0. This
5
address is an IP address or host name that can be used for Network Address Translation
(NAT).
Click Submit to save your changes. Although you are prompted to restart the server, you
6
do not need to until you have completed this procedure.
If you use name resolution, click the DNS tab and enter the IP address for each DNS server.
7
Also, enter the name, if any, that you want to use as your default domain name, such as
mysite.com.
Go to the Administration > Users page and specify a username and password for each
8
Design Studio user. A password must have at least five characters. Click the Add User
button. You should also change the administrator password on this page (the Application
Gateway validates the first eight characters of an administrator password).
Click Submit to save your changes and then restart the server.
9
From your web browser, enter the following to check network connectivity:
10
http://ipAddress:httpPort
For example, the default HTTP port is 80. If the IP address of your Application
Gateway is 192.168.10.0, enter
If the Application Menu or the message "Application Menu not configured" appears,
the Application Gateway is properly configured. If that menu or message does not
appear, check the settings.
For information on Nortel Voice Office applications, refer to the Voice Office Application
Note
Suite Configuration Guide.
For information on installing Design Studio, refer to the Design Studio Getting Started
Guide.
N0078411 Issue 02
http://192.168.10.0:80
Application Gateway Quick Start Guide
.
5