2
Obtain a Keycode License
To activate an Application Gateway, you must have a keycode license which you obtain from
Nortel as described in this section. Nortel will notify you when this temporary procedure is
replaced by a self-service procedure.
To obtain a keycode license for an Application Gateway:
Gather the information required to request a license:
1
The MAC addresses of the Application Gateway Interface 0 (P1), located on the
–
device's front panel to the right and labelled "MAC1".
Your Nortel Customer Purchase Order Number and Customer Reference Number,
–
located on the Packing List.
The number and type of IP phones that you need to license.
–
Send an email to Nortel that contains the following information:
2
To: sswan@nortel.com
Subject: AG 1000 keycode license request
Application Gateway MAC 1 Address __________________
Customer Purchase Order Number ___________________
Customer Reference Number ___________________
Customer Contact Name ___________________
Customer Contact Phone Number ___________________
Customer Company Name ___________________
Customer Company Address, City, State ___________________
Channel Partner Name ___________________
Channel Partner Contact Phone Number ___________________
Number and Type of IP Phones ___________________
Number of Voice Office Licenses ___________________
Number of Guest Services Licenses ________
You will receive a license file from Nortel within 2 to 3 business days.
After you complete all installation procedures in this guide, install the license file as
3
described in the Application Gateway Administration Guide.
2
Application Gateway Quick Start Guide
Silver or Gold? __________
N0078411 Issue 02